新規登録 | ログイン | FAQ      [?] 

Advanced Composite Materials

最近発刊の雑誌の目次より: Advanced Composite Materials © VSP, an imprint of Brill
  • Fabrication of Metal Nanohoneycomb Structures and Their Tribological Behavior
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 101-110.
    by Kim, Sunghan, Lee, Sangmin, Choi, Dukhyun, Lee, Kunhong, Park, Hyunchul, Hwang, Woonbong
  • Effect of Temperature on Frequency and Damping Properties of Polymer Matrix Composites
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 111-124.
    by Colakoglu,
  • Monitoring of a CFRP-Stiffened Panel Manufactured by VaRTM Using Fiber-Optic Sensors
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 125-137.
    by Takeda, Shin-Ichi, Mizutani, Tadahito, Nishi, Takafumi, Uota, Naoki, Hirano, Yoshiyasu, Iwahori, Yutaka, Nagao, Yosuke, Takeda, Nobuo
  • Experimental Characterization of Dynamic Tensile Strength in Unidirectional Carbon/Epoxy Composites
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 139-156.
    by Taniguchi, Norihiko, Nishiwaki, Tsuyoshi, Kawada, Hiroyuki
  • Thermal Properties of Poly(-Caprolactone)/Multiwalled Carbon Nanotubes Composites
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 157-166.
    by Kim, Hun-Sik, Chae, Yun Seok, Choi, Jae Hoon, Yoon, Jin-San, Jin, Hyoung-Joon
  • Effect of Atmospheric Plasma Treatments on Mechanical Properties of VGCF/Epoxy
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 167-175.
    by Khuyen, Nguyen Quang, Kim, Jin Bong, Kim, Byung Sun, Lee, Soo
  • Influence of Uncertainties for Compressive Buckling of Composite Materials and Its Numerical Simulations
    Advanced Composite Materials, Vol. 17, No. 2. (2008), pp. 177-190.
    by Ueda, Tetsuhiko, Takase, Shouhei, Ikeda, Tadashige, Iwahori, Yutaka
  • Robotized Filament Winding of Full Section Parts: Comparison Between Two Winding Trajectory Planning Rules
    Advanced Composite Materials, Vol. 17, No. 1. (2008), pp. 1-23.
    by Sorrentino, , Polini, , Carrino, , Anamateros, , Paris,
  • Development of Insulation Sheet Materials and Their Sound Characterization
    Advanced Composite Materials, Vol. 17, No. 1. (2008), pp. 25-40.
    by Ni, Qing-Qing, Lu, Enjie, Kurahashi, Naoya, Kurashiki, Ken, Kimura, Teruo
  • Smart Honeycomb Sandwich Panels With Damage Detection and Shape Recovery Functions
    Advanced Composite Materials, Vol. 17, No. 1. (2008), pp. 41-56.
    by Okabe, Yoji, Minakuchi, Shu, Shiraishi, Nobuo, Murakami, Ken, Takeda, Nobuo
  • Rate-Dependence of Off-Axis Tensile Behavior of Cross-Ply CFRP Laminates at Elevated Temperature and Its Simulation
    Advanced Composite Materials, Vol. 17, No. 1. (2008), pp. 57-73.
    by Takeuchi, Fumi, Kawai, Masamichi, Zhang, Jian-Qi, Matsuda, Tetsuya
  • High Temperature Fiber Fragmentation Characteristics of SiC Single-Fiber Composite With Titanium Matrices
    Advanced Composite Materials, Vol. 17, No. 1. (2008), pp. 75-87.
    by Matikas, E Theodore
  • Temperature Dependence of Thermo-Mechanical Properties of Banana Fiber-Reinforced Polyester Composites
    Advanced Composite Materials, Vol. 17, No. 1. (2008), pp. 89-99.
    by Shaktawat, Vinodini, Pothan, A Laly, Saxena, , Sharma, Kananbala, Sharma,
  • Papyrus reinforced poly(L-lactic acid) composite
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 259-267.
    by Nishino, Takashi, Hirao, Koichi, Kotera, Masaru
  • Advanced 'green' composites
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 269-282.
    by Netravali, N Anil, Huang, Xiaosong, Mizuta, Kazuhiro
  • Development and mechanical properties of bagasse fiber reinforced composites
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 283-298.
    by Cao, Yong, Goda, Koichi, Shibata, Shinichi
  • Property improvement of natural fiber-reinforced green composites by water treatment
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 299-314.
    by Cho, Donghwan, Seo, Jeong Min, Lee, Hyun Seok, Cho, Chae Wook, Han, Seong Ok, Park, Won Ho
  • Effects of E-beam treatment on the interfacial and mechanical properties of henequen/polypropylene composites
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 315-334.
    by Cho, Donghwan, Lee, Hyun Seok, Han, Seong Ok, Drzal, T Lawrence
  • Processing and mechanical property evaluation of maize fiber reinforced green composites
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 335-347.
    by Dauda, Mohammed, Yoshiba, Masayuki, Miura, Kazuhiro, Takahashi, Satoru
  • Application of silk composite to decorative laminate
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 349-360.
    by Kimura, Teruo, Aoki, Shinpei
  • Examination of heat resistant tensile properties and molding conditions of green composites composed of kenaf fibers and PLA resin
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 361-376.
    by Ben, Goichi, Kihara, Yuichi, Nakamori, Keita, Aoki, Yoshio
  • Thermal conductivity of PLA-bamboo fiber composites
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 377-384.
    by Takagi, Hitoshi, Kako, Shuhei, Kusano, Koji, Ousaka, Akiharu
  • Effect of molding condition on tensile properties of hemp fiber reinforced composite
    Advanced Composite Materials, Vol. 16, No. 4. (2007), pp. 385-394.
    by Takemura, , Minekage,
  • Conductivity stability of carbon nanofiber/unsaturated polyester nanocomposites
    Advanced Composite Materials, Vol. 16, No. 3. (2007), pp. 195-206.
    by Wu, Shi-Hong, Natsuki, Toshiaki, Kurashiki, Ken, Ni, Qing-Qing, Iwamoto, Masaharu, Fujii, Yoshimichi
  • Modeling of the filling process during resin injection/compression molding
    Advanced Composite Materials, Vol. 16, No. 3. (2007), pp. 207-221.
    by Chang, Chih-Yuan
  • Characterization of tensile damage progress in stitched CFRP laminates
    Advanced Composite Materials, Vol. 16, No. 3. (2007), pp. 223-244.
    by Yoshimura, Akinori, Yashiro, Shigeki, Okabe, Tomonaga, Takeda, Nobuo
  • Dependence of Weibull parameters on the diameter and the internal defects of Tyranno ZMI fiber in the strength analysis
    Advanced Composite Materials, Vol. 16, No. 3. (2007), pp. 245-258.
    by Morimoto, Tetsuya, Yamamoto, Koji, Ogihara, Shinji
  • Influence of water saturation on fracture toughness in woven natural fiber reinforced composites
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 83-94.
    by Kim, Hyojin, Seo, Dowon
  • Experimental investigation of interlaminar mechanical properties on carbon fiber stitched CFRP laminates
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 95-113.
    by Iwahori, Yutaka, Ishikawa, Takashi, Watanabe, Naoyuki, Ito, Akira, Hayashi, Yoichi, Sugimoto, Sunao
  • Numerical study for identifying damage in open-hole composites with embedded FBG sensors and its application to experiment results
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 115-134.
    by Yashiro, , Murai, , Okabe, , Takeda,
  • Cost-effective structural health monitoring of FRPC parts for automotive applications
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 135-149.
    by Mitschang, , Molnar, , Ogale, , Ishii,
  • High-cycle fatigue characteristics of quasi-isotropic CFRP laminates
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 151-166.
    by Hosoi, Atsushi, Arao, Yoshihiko, Karasawa, Hirokazu, Kawada, Hiroyuki
  • Tensile strength of unidirectional CFRP laminate under high strain rate
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 167-180.
    by Taniguchi, Norihiko, Nishiwaki, Tsuyoshi, Kawada, Hiroyuki
  • Mechanical properties of ABS resin reinforced with recycled CFRP
    Advanced Composite Materials, Vol. 16, No. 2. (2007), pp. 181-194.
    by Ogi, Keiji, Nishikawa, Takashi, Okano, Yasutaka, Taketa, Ichiro
  • Electrical properties of ABS resin reinforced with recycled CFRP
    Advanced Composite Materials, Vol. 16, No. 1. (2007), pp. 1-10.
    by Nishikawa, Takashi, Ogi, Keiji, Tanaka, Toshiro, Okano, Yasutaka, Taketa, Ichiro
  • Suppression of interfacial crack for foam core sandwich panel with crack arrester
    Advanced Composite Materials, Vol. 16, No. 1. (2007), pp. 11-30.
    by Hirose, , Hojo, , Fujiyoshi, , Matsubara,
  • Bonding and debonding behavior of FRP sheets under fatigue loading
    Advanced Composite Materials, Vol. 16, No. 1. (2007), pp. 31-44.
    by Iwashita, Kentaro, Wu, Zhishen, Ishikawa, Takashi, Hamaguchi, Yasumasa, Suzuki, Toshio
  • Damage propagation in CFRP laminates subjected to low velocity impact and static indentation
    Advanced Composite Materials, Vol. 16, No. 1. (2007), pp. 45-61.
    by Aoki, Yuichiro, Suemasu, Hiroshi, Ishikawa, Takashi
  • Electro-elastic analysis of piezoelectric laminated plates
    Advanced Composite Materials, Vol. 16, No. 1. (2007), pp. 63-81.
    by Zhao, Minghao, Qian, Caifu, Lee, , Tong, Pin, Suemasu, , Zhang, Tong-Yi
  • Fuzzy modeling of vibration of a smart CFRP composite beam and control effect by using the model
    Advanced Composite Materials, Vol. 15, No. 4. (2006), pp. 357-370.
    by Oda, Susumu, Takawa, Takeshi
  • Fabrication of epoxy-montmorillonite hybrid composites used for printed circuit boards via in-situ polymerization
    Advanced Composite Materials, Vol. 15, No. 4. (2006), pp. 371-384.
    by Yung, , Wang, , Yue,
  • Fatigue reliability analysis of composites based on residual strength
    Advanced Composite Materials, Vol. 15, No. 4. (2006), pp. 385-402.
    by Cheng, Ho-Chih, Hwu, Farn-Shiun
  • Vibration control of a smart structure embedded with metal-core piezoelectric fibers
    Advanced Composite Materials, Vol. 15, No. 4. (2006), pp. 403-417.
    by Takagi, Kiyoshi, Sato, Hiroshi, Saigo, Muneharu
  • A strength reliability model of unidirectional fiber-reinforced ceramic matrix composites by Markov process
    Advanced Composite Materials, Vol. 15, No. 3. (2006), pp. 263-285.
    by Goda, Koichi, Okabe, Tomonaga, Takeda, Nobuo
  • Numerical simulation of the pressure infiltration of fibrous preforms during MMC processing
    Advanced Composite Materials, Vol. 15, No. 3. (2006), pp. 287-300.
    by Chang, Chih-Yuan
  • Analysis of transverse lamina cracks in multi-directionally 0, 45 and 90 oriented reinforced laminates and a damage tolerance design of composite plates
    Advanced Composite Materials, Vol. 15, No. 3. (2006), pp. 301-317.
    by Kageyama, Kazuro, Abe, Satoshi, Hiekata, Kazuo
  • Proposal of suppression of delamination for the foam core sandwich panel joint with filler
    Advanced Composite Materials, Vol. 15, No. 3. (2006), pp. 319-339.
    by Hirose, , Nishitani, , Ochi, , Fukumoto, , Kawasaki, , Hojo,
  • Extended fractal branch and bound method for optimization of multiple stacking sequences of stiffened composite panel
    Advanced Composite Materials, Vol. 15, No. 3. (2006), pp. 341-356.
    by Sekishiro, Masato, Todoroki, Akira
  • Optimum stacking sequences for extensiontwist coupled composites subject to thermal stresses
    Advanced Composite Materials, Vol. 15, No. 2. (2006), pp. 127-137.
    by Ozbay, Serkan, Armanios, A Erian
  • Compressive property degradation of composite stiffened panel due to debonding and delaminations
    Advanced Composite Materials, Vol. 15, No. 2. (2006), pp. 139-151.
    by Suemasu, Hiroshi, Kurihara, Keisuke, Arai, Keiji, Majima, Osamu, Ishikawa, Takashi
    • 注: このページを引用する時は次のURLでどうぞ: http://www.citeulike.org/journal/vsp-acm

    Result page: 1 2 3 Next RIS BibTeX
    CiteULike organises scholarly (or academic) papers or literature and provides bibliographic (which means it makes bibliographies) for universities and higher education establishments. It helps undergraduates and postgraduates. People studying for PhDs or in postdoctoral (postdoc) positions. The service is similar in scope to EndNote or RefWorks or any other reference manager like BibTeX, but it is a social bookmarking service for scientists and humanities researchers.