新規登録 | ログイン | FAQ      [?] 

Applied Composite Materials

最近発刊の雑誌の目次より: Applied Composite Materials © Springer
  • Determination of Compressive Properties of Fibre Composites in the In-plane Direction According to ISO 14126. Part 1: A Round Robin Test
    Applied Composite Materials, Vol. 14, No. 1. (January 2007), pp. 1-15.
    by Schneider, Konrad
  • Experimental Study on Tensile Behavior of Carbon Fiber and Carbon Fiber Reinforced Aluminum at Different Strain Rate
    Applied Composite Materials, Vol. 14, No. 1. (January 2007), pp. 17-31.
    by Zhou, Yuanxin, Wang, Ying, Jeelani, Shaik, Xia, Yuanming
  • Essential and Non-essential Work of Fracture of PI/SiO2 Hybrid Thin Films
    Applied Composite Materials, Vol. 14, No. 1. (January 2007), pp. 33-45.
    by Wang, , Lu,
  • Experimental and Numerical Investigations on the Ballistic Performance of Polymer Matrix Composites Used in Armor Design
    Applied Composite Materials, Vol. 14, No. 1. (January 2007), pp. 47-58.
    by Colakoglu, , Soykasap, , Ozek,
  • The Effect of Crack Spacing Distribution on Stiffness Reduction of Cross-ply Laminates
    Applied Composite Materials, Vol. 14, No. 1. (January 2007), pp. 59-66.
    by Rubenis, , Sparnins, , Andersons, , Joffe,
  • Damage Resistance of Composites Based on Glass Fibre Reinforced Low Styrene Emission Resins for Marine Applications
    Applied Composite Materials, Vol. 14, No. 1. (January 2007), pp. 67-87.
    by Perrot, , Baley, , Grohens, , Davies,
  • Non-Local Theory Solution for an Anti-Plane Shear Permeable Crack in Functionally Graded Piezoelectric Materials
    Applied Composite Materials, Vol. 13, No. 6. (November 2006), pp. 345-367.
    by Zhou, Zhen-Gong, Wang, Biao
  • Temperature Effects on the Impact Behavior of Fiberglass and Fiberglass/Kevlar Sandwich Composites
    Applied Composite Materials, Vol. 13, No. 6. (November 2006), pp. 369-383.
    by Halvorsen, Aaron, Salehi-Khojn, Amin, Mahinfalah, Mohammad, Nakhaei-Jazar, Reza
  • Machinability of Metal Matrix Composites Reinforced by 3-D Network Structure
    Applied Composite Materials, Vol. 13, No. 6. (November 2006), pp. 385-395.
    by Wang, Shouren, Geng, Haoran, Song, Bo, Wang, Yingzi
  • Oxidation Protective Multilayer CVD SiC Coatings Modified by a Graphitic B-C Interlayer for 3D C/SiC Composite
    Applied Composite Materials, Vol. 13, No. 6. (November 2006), pp. 397-406.
    by Wu, Shoujun, Cheng, Laifei, Yang, Wenbin, Liu, Yongsheng, Zhang, Litong, Xu, Yongdong
  • Experimental Investigations on Deformation and Fracture Behavior of Glass Sphere Filled Epoxy Functionally Graded Materials
    Applied Composite Materials, Vol. 13, No. 6. (November 2006), pp. 407-420.
    by Yao, , Xiong, , Xu, , Yeh,
  • Cracking Models; Broken Parts
    Applied Composite Materials, Vol. 13, No. 5. (September 2006), pp. 265-285.
    by Beaumont, Peter
  • Mode III Interlaminar Fracture Behavior of Glass Fiber Reinforced Polymer Woven Laminates at 293 to 4 K
    Applied Composite Materials, Vol. 13, No. 5. (September 2006), pp. 287-304.
    by Rizov, Victor, Shindo, Yasuhide, Horiguchi, Katsumi, Narita, Fumio
  • Reduction of Noise from Disc Brake Systems Using Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)
    Applied Composite Materials, Vol. 13, No. 5. (September 2006), pp. 305-319.
    by Masoomi, Mohsen, Katbab, Ali, Nazockdast, Hossein
  • Development and Assessment of a New CFRP RodAnchor System for Prestressed Concrete
    Applied Composite Materials, Vol. 13, No. 5. (September 2006), pp. 321-334.
    by Al-Mayah, , Soudki, , Plumtree,
  • Mathematical Analysis of Resin Flow through Fibrous Porous Media
    Applied Composite Materials, Vol. 13, No. 5. (September 2006), pp. 335-343.
    by Song, Young
  • Fracture Assessment of Carbon Fibre/Epoxy Reinforcing Rings through a Combination of Full-Scale Testing, Small-Scale Testing and Stress Modeling
    Applied Composite Materials, Vol. 13, No. 2. (March 2006), pp. 57-85.
    by Samyn, Pieter, Schepdael, Ludo, Paepegem, Wim, Leendertz, , Suister, Eric, Baets, Patrick, Degrieck, Joris
  • Structural Health Monitoring of Cracked Aircraft Panels Repaired with Bonded Patches Using Fiber Bragg Grating Sensors
    Applied Composite Materials, Vol. 13, No. 2. (March 2006), pp. 87-98.
    by Sekine, Hideki, Fujimoto, Shin-Etsu, Okabe, Tomonaga, Takeda, Nobuo, Yokobori, Toshimitsu
  • Structural Assessment of Externally Strengthened Bridge Deck Panels
    Applied Composite Materials, Vol. 13, No. 2. (March 2006), pp. 99-114.
    by Sim, Jongsung, Oh, Hongseob, Meyer, Christian
  • Interpenetrating Microstructure and Properties of Si3N4/AlMg Composites Fabricated by Pressureless Infiltration
    Applied Composite Materials, Vol. 13, No. 2. (March 2006), pp. 115-126.
    by Shouren, Wang, Haoran, Geng, Jingchun, Zhang, Yingzi, Wang
  • Mechanical Properties of Composites Based on Low Styrene Emission Polyester Resins for Marine Applications
    Applied Composite Materials, Vol. 13, No. 1. (January 2006), pp. 1-22.
    by Baley, Christophe, Perrot, , Davies, Peter, Bourmaud, , Grohens, Yves
  • Effects of Ni and TiN Coatings on the Alumina/Heat-Resistant Steel Interface Properties
    Applied Composite Materials, Vol. 13, No. 1. (January 2006), pp. 23-29.
    by Wang, Enze, Yi, Yong, Xie, Hua, Fan, Yongge
  • Intensity of Local Effects at the Core Junctions in Sandwich Panels
    Applied Composite Materials, Vol. 13, No. 1. (January 2006), pp. 31-42.
    by Bozhevolnaya, , Pantke,
  • Selective Carbon Fiber Reinforced Nylon 66 Spur Gears: Development and Performance
    Applied Composite Materials, Vol. 13, No. 1. (January 2006), pp. 43-56.
    by Senthilvelan, , Gnanamoorthy,
  • Development and Validation of a Novel Bird Strike Resistant Composite Leading Edge Structure
    Applied Composite Materials, Vol. 12, No. 6. (November 2005), pp. 327-353.
    by Th Kermanidis, G Labeas, M Sunaric, L Ubels
  • A Method for Crash Tests on Laminated Composite Scaled-Down Models
    Applied Composite Materials, Vol. 12, No. 6. (November 2005), pp. 355-368.
    by Remi Greneche, Yves Ravalard, Daniel Coutellier
  • Effect of Short Fibre Reinforcement on the Friction and Wear Behaviour of Nylon 66
    Applied Composite Materials, Vol. 12, No. 6. (November 2005), pp. 369-383.
    by G Srinath, R Gnanamoorthy
  • An Investigation of Interfacial Fatigue in Fiber Reinforced Composites
    Applied Composite Materials, Vol. 12, No. 5. (September 2005), pp. 265-276.
    by Chen Yanhua, Shi Zhifei
  • Strength and Failure Modes of Hoop Wound CFRP Tubes Under Compressive High Rates of Loading
    Applied Composite Materials, Vol. 12, No. 5. (September 2005), pp. 277-292.
    by R Ahmad, F Al-Salehi, S Al-Hassani, M Hinton
  • Interlaminar Tests for Marine Applications. Evaluation of the Influence of Peel Plies and Fabrication Delays
    Applied Composite Materials, Vol. 12, No. 5. (September 2005), pp. 293-307.
    by P Davies, C Baley, H Loaec, Y Grohens
  • Rehabilitation of Composite Steel Bridges Using GFRP Plates
    Applied Composite Materials, Vol. 12, No. 5. (September 2005), pp. 309-325.
    by A Damatty, M Abushagur, M Youssef
  • Localized Effects across Core Junctions in Sandwich Beams Subjected to In-Plane and Out-of-Plane Loading
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 135-147.
    by Elena Bozhevolnaya, Anders Lyckegaard, Ole Thomsen
  • Compression-after-Impact Strength of Sandwich Panels with Core Crushing Damage
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 149-164.
    by Andrey Shipsha, Dan Zenkert
  • The Effect of Load and Geometry on the Failure Modes of Sandwich Beams
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 165-176.
    by M Konsta-Gdoutos, E Gdoutos
  • Experimental and Numerical Analysis of Inserts in Sandwich Structures
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 177-191.
    by P Bunyawanichakul, B Castanie, J Barrau
  • High Strain Rate Response of Sandwich Composites with Nanophased Cores
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 193-211.
    by Hassan Mahfuz, Mohammed Uddin, Vijaya Rangari, Mrinal Saha, Shaik Zainuddin, Shaik Jeelani
  • Experimental Analysis and Modeling of the Crushing of Honeycomb Cores
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 213-227.
    by Y Aminanda, B Castanie, J Barrau, P Thevenet
  • Cellular Truss Core Sandwich Structures
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 229-246.
    by David Sypeck
  • Enhancement of Energy Absorption in Syntactic Foams by Nanoclay Incorporation for Sandwich Core Applications
    Applied Composite Materials, Vol. 12, No. 3-4. (May 2005), pp. 247-261.
    by Nikhil Gupta, Rahul Maharsia
  • Determination of Residual Stresses in a Boron Fibre/Aluminium Matrix Composite
    Applied Composite Materials, Vol. 12, No. 2. (March 2005), pp. 65-72.
    by S Gasparyan, N Andrianopoulos
  • Buckling of Sandwich Composites; Effects of Core-Skin Debonding and Core Density
    Applied Composite Materials, Vol. 12, No. 2. (March 2005), pp. 73-91.
    by Hassan Mahfuz, Syful Islam, Mrinal Saha, Leif Carlsson, Shaik Jeelani
  • A New Method to Quantify Delamination Resistance of Fibre Reinforced Polymers (FRP) under Transverse Loading
    Applied Composite Materials, Vol. 12, No. 2. (March 2005), pp. 93-108.
    by T Kuboki, E Gallagher, P Jar, J Cheng
  • Prediction of Impact-Induced Fibre Damage in Circular Composite Plates
    Applied Composite Materials, Vol. 12, No. 2. (March 2005), pp. 109-131.
    by J Lee, C Soutis
  • Ultrasonic Study of Elastic Anisotropy of Material Composite
    Applied Composite Materials, Vol. 11, No. 6., 341.
    by A Mouchtachi, El E Guerjouma, JC Baboux, P Santini, P Merle, D Bouami
  • Mechanical Properties and Failure Behavior of CordRubber Composites
    Applied Composite Materials, Vol. 11, No. 6., 353.
    by Shiguo Rao, Isaac M Daniel, Emmanuel E Gdoutos
  • Damage Mechanisms in Injection Molded Unreinforced, Glass and Carbon Reinforced Nylon 66 Spur Gears
    Applied Composite Materials, Vol. 11, No. 6., 377.
    by S Senthilvelan, R Gnanamoorthy
  • Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites
    Applied Composite Materials, Vol. 11, No. 6., 399.
    by P Cavaliere, E Cerri, P Leo, L Marzoli, Dos D Santos
    • 注: このページを引用する時は次のURLでどうぞ: http://www.citeulike.org/journal/klu-acma

    RIS BibTeX
    CiteULike organises scholarly (or academic) papers or literature and provides bibliographic (which means it makes bibliographies) for universities and higher education establishments. It helps undergraduates and postgraduates. People studying for PhDs or in postdoctoral (postdoc) positions. The service is similar in scope to EndNote or RefWorks or any other reference manager like BibTeX, but it is a social bookmarking service for scientists and humanities researchers.